Obomoto™ High-Power Water Drill Pump
Transfer, Drain & Pump High Pressured Water Anywhere Effectively!
Summer always seems to bring a hosepipe ban and it is a test of ingenuity to think of different ways of beating it. Our High-Power Water Transfer Drill Pump virtually converts any drill into a high capacity pump capable of occasional emptying of sinks, aquariums, pool skimmers, and much more.
Our pump is designed to work with any corded or cordless drill and allows you to conveniently pump high pressured water from anywhere. It has quick fixes connections so that your hose can quickly be attached to the pump without any fiddle.
Self-priming up to 9ft and pumps water out to a maximum distance of 45ft(13.7m). Compatible with all drill types with an output of 120W or more and pumps a minimum of 56 liters per minute depending on the power of the hand drill.
POWER SPEED WATER OUTPUT
- 120W: 1500 25-30L/min
- 320W: 2000-2500 35L/min
- 350W: 2500 40L/min
- 450W: 3200-3500 50L/min
- 650W: 3200-3500 56-60L/min
Liquids such as rainwater, fresh water, seawater, oil, diluted organic solvents, insecticides, and liquid fertilizers can all be transferred using this handy little pump. The perfect pump for both indoor and outdoor use.
-
Convenient high-pressured water
Specifically designed to convert your drill into a high-capacity pump anywhere. It is self-priming and has the capacity to pump water or light liquids to maximum distances.
-
Compatible with all drill types
Able to fit all kinds of electric drill chucks.
-
High-powered and easy to install
Simply attach it to an electric drill and get high-pressured water. Transfer and drain efficiently.
-
Multipurpose
Ideal for transferring and draining of a different kind of liquid, like water, oil, insecticides, etc. Suitable for home, garden, or outdoor use.
-
Compact and lightweight
Carry it along with you anywhere conveniently.
-
High Quality
Made with high-quality PVC and stainless steel internal parts. Guaranteed rust-proof.
- To assure optimum priming and long life, apply a few drops of lubricating oil in pump inlet prior to each use and flush with clean water after each use.
- Be sure the inlet hose is airtight and as short as possible. Inlet hose should not exceed 3m.
- When pumping abrasive fluids or liquids with solids, longer pump life will be obtained by using a strainer on the inlet line
- It is recommended that the pump is mounted to a surface for security and ease of use.
- Mount and start drill. Watch inlet tub into be certain fluid is drawn into pump in15-20 seconds. If not, check that the inlet tube is properly mounted to the inlet pump.
- Do not run dry if the pump fails to prime, check to be sure that hoses are not clogged. Pump depends on the fluid being pumped for lubrication.
- NOTE: DO NOT run the pump in reverse.
SPECIFICATIONS
- Material: Engineering-certified plastics
- Pump shank: 8mm round shank
- Transmission medium: oil/water pump
- Dimensions: L106mm x W37mm x H64mm
- Fitment: For electric drill
- Temperature: Max. 4-59 Degrees Celsius
PACKAGE INCLUDES
- 1 x Hand Electric Drill Drive Self Priming Water Transfer Pump Set
SHIPPING FEE - FLAT RATE OF $5.99
SHIPPING DELAY NOTICE:
Please expect 2-4 weeks shipping delay due to the High Volume of Order.